Types of weld joints

The American Welding Society defines a joint as “the manner in which materials fit together.” there are five basic types of weld joints:

• Butt joint.
• T-joint.
• Lap joint.
• Corner joint.
• Edge joint.

1. Butt joint:

Butt joints are end to end joint, in which the parts lie in the same plane and are joined at the ends.

butt joint

2. T-joint:

In a T-joint (also called as Tee Joint), one part is at the right angle to the other part and it forms a shape similar to alphabet “T”.

T (tee) joint

3. Lap joint:

In Lap joint, two overlapping parts are joined together.

lap joint

4. Corner Joint:

In corner joint ends of the adjoining parts are joined, parts are placed at right angles to each other.

corner joint

5. Edge joint:

The adjoining parts in edge joints are kept parallel with each other with a common edge and the joint is made at the common edge(s).

edge joint

Please watch the video (given below) for a better understanding of classification of weld joint:

 

Sandeep Anand

I am a Mechanical Engineer with more than ten years of work experience in the field of welding and NDT.

8 thoughts on “Types of weld joints

  • December 31, 2017 at 1:21 am
    Permalink

    I want to learn about the welding and want to learn the welding tips

    Reply
  • May 1, 2018 at 9:57 am
    Permalink

    There is one more joint called Cruciform joint.

    Reply
  • February 5, 2019 at 10:02 pm
    Permalink

    Why we using dis kinds of joints and wat welds they r useful

    Reply
    • August 3, 2020 at 2:52 pm
      Permalink

      Thank you

      Reply
  • July 25, 2020 at 5:49 pm
    Permalink

    Very helpful article charles!

    Reply
    • August 3, 2020 at 2:47 pm
      Permalink

      Thank you

      Reply

Leave a Reply to Rameez Ahmed Cancel reply

Your email address will not be published. Required fields are marked *